Trigger Kicker 22LR Compatibility Kit

Description

Freebie

Kit includes a 22LR dry fire block while supplies last.

Spring Wing

Spring Wing compatible with milspec triggers only. Remove hammer and trigger, insert Spring Wing directly below where the hammer goes with the spring end at the rear, re-install trigger and hammer. Clip off the top coil of spring wing only if unable to pull the trigger enough to drop the hammer.

Trigger Kicker Hammer Unfollower

Trigger Kicker Hammer Unfollower compatible with milspec triggers only. Install the square shaped spring retainer by clipping it around the front of the hammer spring.

Install trigger (including spring retainer and spring) into lower and install trigger kicker, insert trigger pin with the notch on the right side, then install the remaining second piece with the smaller end on the right (so there’s enough clearance for the right leg of the hammer spring to lock into the groove on the trigger pin to hold it in place)

Lastly, install hammer with the hammer spring legs situated directly above the second piece to hold it (along with the Trigger Kicker) down.

Trigger Kicker Kick Trip

Designed to fit 22lr conversion bolts – BoreBuddy/PSA/RTB/CMMG – provides a trip point to manipulate the trigger kicker.